I need a lab report completed

ERRORS

 

There are several types and sources of experimental errors:

 

  1. The accuracy limitations of the measuring device: For example a digital scale may be accurate to 0.1 g, 0.01 g, 0.001 g, etc., a precision analytical balance may be accurate to 0.0002 g or

0.2 mg.

 

  1. Instrument errors due to calibration of an instrument.

 

  1. Reading errors: Incorrectly interpreting interpolated values; inaccurate readings due to

fluctuating instrument read-outs.

 

  1. Uncontrolled environmental factors: Slight temperature or humidity variation in the laboratory may affect the measurements.

 

  1. Over-simplifications or inherent limitations in the experimental design: For example, we may not be able to achieve a totally frictionless environment in a physics experiment.

 

  1. Human errors: Reading the measurement incorrectly, or simply writing down the wrong number; reading a scale at angle may result in a “parallax error.”

 

Experimental error is the difference between a measurement and the true value.  However, because we will know the true value, we have to make an estimation of this true value.

 

QUESTION 1

Imagine that your team has been assigned by a construction company to measure the dimensions of an empty lot in a subdivision.  Briefly give examples of the 6 types/sources of errors described above and explain what you would do to minimize them.

 

Two important concepts:  Accuracy and Precision.

 

Accuracy refers to how close a measured value is to the true or accepted value. As the true value of the quantity is often not known, it may be impossible to determine the accuracy of a measurement.  Instead, we rely on estimated values.

 

Precision (also known as repeatability or reproducibility)refers to how closely repeated measurements agree with each other under identical experimental conditions.

 

These concepts are typically represented using the following bull’s eye diagrams:

 

 

   

QUESTION 2

A certain gas is known to have a pressure of 9 psi.  We are asked to take measurements using two different sensors.  These are the results that we obtained after measuring the pressure of the gas 7 different times.

 

Sensor 1:     9.8    10.010.3 9.7   9.9   10.1 9.8   

Sensor 2:     9.3   9.5   8.6   9.0   8.9   9.2   8.5

 

Do you believe one of the sensors is more accurate than the other?  What about precise?  Explain your reasoning.

 

Percent error: This is the difference between the measured value and the real value divided by the real value. As we may not know the real value, most of the times we will use the accepted or estimated value. The percent error can be written as:

PHY-115_Lab-1_Q2.PNG

The |Measured Value – Accepted Value|  means the absolute value between these two numbers;  this means to omit the sign.

 

Example:  Measuring a 1.5 V battery twice gives the following readings:   1.63 V  and 1.37 V.  Calculate the percent error of each measurement.

 

PHY-115_Lab-1_Q2[2].PNG

Mean and Standard Deviation:  These are the two most used parameters at the time of evaluating experimental measurements.

 

Mean is the average of the measurements.It indicates the central value at which the values tend to congregate. If we called x each value, the mean is notated as x.   It can be calculated as:

PHY-115_Lab-1_Q2[3].PNG

Standard Deviation  is an indication of the spread of the individual measurements around the mean.  Standard deviation is typically notated  using the Greek letter Sigma (σ ).  Standard deviation for a set of values (x) can be calculated as:

PHY-115_Lab-1_Q2[4].PNG

Let’s see what this means.   The part (x – x ) indicates the difference between each one of the measurements and the mean.  Each one of these number is squared.  The symbol Σ means summation, so we will add those values.  The total result will be then divided by the number of measurements minus 1 and finally, we calculate the square root of the result.

 

Example:  Let’s calculate the mean and standard deviation of the gas pressure experiment using sensor 1.  As you remember , the set of values is as follows:

 

Sensor 1:         9.8       10.0   10.3    9.7      9.9      10.1    9.8      

 

PHY-115_Lab-1_Q2[5].PNG    

 

 

IMPORTANT NOTE

Most of today’s handheld calculators and spreadsheet programs can perform calculations of mean, standard deviation and other statistical parameters.  Other than for answering Question 3, you can use these tools for the rest of this lab as well as for calculations in future labs. If you are not familiar on how to do this, it is now a good time to dust off the calculator’s user manual or search for how to do these calculations in the spreadsheet you are using.

 

QUESTION 3

Calculate the mean and standard deviation from the values using Sensor 2.  Show all your work step by step.  Sensor 2values:           9.3      9.5      8.6      9.0      8.9      9.2      8.5

 

QUESTION 4  

If we were able to perform totally accurate and precise measurements, what would be the standard deviation in these conditions?

 

QUESTION 5   

By inspecting the mean and standard deviation values from Sensor 1 and Sensor 2, what can you say about the accuracy of each sensor.  What about its precision?

 

PROCEDURE

Since this is the first lab experience, we will work with a set of given data rather than taking the data yourself.

 

The data in the table below corresponds to measurements taken during a free-fall experiment.  At different time intervals the experimenter measures the distance of the object from its initial point as it falls down. The experiment is repeated 5 times (5 trials).

Distance (y) at different time intervals in free-fall experiment

         
 

Trial 1

Trial 2

Trial 3

Trial 4

Trial 5

Time (s)

Y1 (m)

Y2 (m)

Y3 (m)

Y4 (m)

Y5 (m)

0.00

0

0

0

0

0

0.50

1.0

1.4

1.1

1.4

1.5

0.75

2.6

3.2

2.8

2.5

3.1

1.00

4.8

4.4

5.1

4.7

4.8

1.25

8.2

7.9

7.5

8.1

7.4

 

 

QUESTION 6   

Calculate the Mean (Y) and Standard Deviation for each time completing the table below.

 

Distance (y) at different time intervals in free-fall experiment

             
 

Trial 1

Trial 2

Trial 3

Trial 4

Trial 5

Mean

Std. Dev.

Time (s)

Y1 (m)

Y2 (m)

Y3 (m)

Y4 (m)

Y5 (m)

(Y (m))

σ

0.00

0

0

0

0

0

   

0.50

1.0

1.4

1.1

1.4

1.5

   

0.75

2.6

3.2

2.8

2.5

3.1

   

1.00

4.8

4.4

5.1

4.7

4.8

   

1.25

8.2

7.9

7.5

8.1

7.4

   

 

QUESTION 7

Using the spreadsheet or plotting program of your choice, plot (Y) vs. t  (that is, plot (Y) in the vertical axis and t in the horizontal axis.

 

LABORATORY REPORT

Create a laboratory report  using Word or another word processing software  that contains at least these elements:

 

  • Introduction:  what is the purpose of this laboratory experiment?

  • Description of how you performed the different parts of this exercise.  At the very least, this part should contain the answers to questions 1-7 above.  You should also include procedures, etc.  Adding pictures to your lab report showing your work as needed always increases the value of the report.

  • Conclusion: What area(s) you had difficulties with in the lab; what you learned in this experiment; how it applies to your coursework and any other comments.

 

Essay Help
Calculate your paper price
Pages (550 words)
Approximate price: -

Why Work with Us

Top Quality and Well-Researched Papers

We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.

Professional and Experienced Academic Writers

We have a team of professional writers with experience in academic and business writing. Many are native speakers and able to perform any task for which you need help.

Free Unlimited Revisions

If you think we missed something, send your order for a free revision. You have 10 days to submit the order for review after you have received the final document. You can do this yourself after logging into your personal account or by contacting our support.

Prompt Delivery and 100% Money-Back-Guarantee

All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.

Original & Confidential

We use several writing tools checks to ensure that all documents you receive are free from plagiarism. Our editors carefully review all quotations in the text. We also promise maximum confidentiality in all of our services.

24/7 Customer Support

Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.

Try it now!

Calculate the price of your order

Total price:
$0.00

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.

Essays

Essay Writing Service

No matter what kind of academic paper you need and how urgent you need it, you are welcome to choose your academic level and the type of your paper at an affordable price. We take care of all your paper needs and give a 24/7 customer care support system.

Admissions

Admission Essays & Business Writing Help

An admission essay is an essay or other written statement by a candidate, often a potential student enrolling in a college, university, or graduate school. You can be rest assurred that through our service we will write the best admission essay for you.

Reviews

Editing Support

Our academic writers and editors make the necessary changes to your paper so that it is polished. We also format your document by correctly quoting the sources and creating reference lists in the formats APA, Harvard, MLA, Chicago / Turabian.

Reviews

Revision Support

If you think your paper could be improved, you can request a review. In this case, your paper will be checked by the writer or assigned to an editor. You can use this option as many times as you see fit. This is free because we want you to be completely satisfied with the service offered.