C++ stack related. given .cpp file and main file along with the pdf

 In this assignment, you will be using the Stack abstract data type we developed this week and discussed in our weeks lectures, to implement 4 functions that use a stack data type to accomplish their algorithms. The functions range from relatively simple, straight forward use of a stack, to a bit more complex. But in all 4 cases, you should only need to use the abstract stack interface functions push(), pop(), top(), and isEmpty() in order to successfully use our Stack type for this assignment and the function you are asked to write. For this assignment you need to perform the following tasks.

1. In the first task, we will write a function that will check if a string of parenthesis is matching. Strings will be given to the function of the format “(()((())))”, using only opening “(” and closing “)”. Your function should be named doParenthesisMatch(). It takes a single 1 string as input, and it returns a boolean result of true if the parenthesis match, and false otherwise. The algorithm to check for matching parenthesis using a stack is fairly simple. A pseudo-code description migth be for each charcter c in expression do if c is an open paren ‘(‘ push it on stack if c is a close paren ‘)’: do if stack is empty answer is false, because we can’t match the current ‘)’ else pop stack, because we just matched an open ‘(‘ with a close ‘)’ done done Your function will be given a C++ string class as input. It is relatively simple to parse each character of a C++ string. Here is an example for loop to do this: s = “(())”; for (size_t index = 0; index < s.length(); index++) { char c = s[index]; // handle char c of the string expression s here }

2. In the next task, we will also write a function that decodes a string expression. Given a sequence consisting of ‘I’ and ‘D’ characters, where ‘I’ denotes increasing and ‘D’ denotes decreasing, decode the given sequence to construct a “minimum number” without repeated digits. An example of some inputs and outputs will make it clear what is meant by a “minimal number”. 2 sequence output IIII -> 12345 DDDD -> 54321 ID -> 132 IDIDII -> 1325467 IIDDIDID -> 125437698 If you are given 4 characters in the input sequence, the result will be a number with 5 characters, and further only the digits ‘12345’ would be in the “minimal number” output. Each ‘I’ and ‘D’ in the input denotes that the next digit in the output should go up (increase) or go down (decrease) respectively. As you can see for the input sequence “IDI” you have to accommodate the sequence, thus the output goes from 1 to 3 for the initial increase, becase in order to then decrease, and also only have the digits ‘123’, we need 3 for the second digit so the third can decrease to 2. Take a moment to think how you might write an algorithm to solve this problem? It may be dicult to think of any solution involving a simple iterative loop (though a recursive function is not too dicult). However, the algorithm is relatively simple if we use a stack. Here is the pseudo-code: for each character c in input sequence do push character index+1 onto stack (given 0 based index in C) if we have processed all characters or c == ‘I’ (an increase) do pop each index from stack and append it to the end of result done done Your function should be named decodeIDSequence(). It will take a string of input sequence, like “IDI” as input, and it will return a string type, the resulting minimal number. Notice we will be constructing a string to return here, so simply start with an empty string ~string result = “”` and append the digits to the end when you pop them from the stack as described. 3

3. In the third task, you will write two functions that will be able to sort a stack. First of all, you should write a simpler method that, given an already sorted stack as input, and an item of the same type as the stack type, the item should be inserted into the correct position on the sorted stack to keep it sorted. For example, the stacks will be sorted in ascending order, where the item at the bottom of the stack is the smallest value, and the item at the top is the largest, like this: top: 8 7 5 3 1 :bottom If we call the function to insert a 4 into this sorted stack, the result should be: top: 8 7 5 4 3 1 Your function should be called insertItemOnSortedStack(). This function takes an item as its rst parameter, and a reference to a Stack as its second parameter. You should create and use another temporary stack in your function in order to accmplish the task. The pseudo-code to accomplish this insertion is relatively simple: given inputStack and create temporaryStack for this algorithm while top of inputStack > item we want to insert do pop topItem from inputStack push topItem onto the temporaryStack done at this point, items on inputStack are <= to the item we want to insert so push item onto inputStack now put items back from temporaryStack to original inputStack while temporaryStack is not empty do pop topItem from temporaryStack push topItem onto the inputStack done 4 The tests given for the insert function use an AStack (a stack of integers) for the tests. You can originally create your function to use a Stack & as its second input parameter. It is important that the stack be a reference parameter here. Also notice that instead of specifying an AStack &, we specify the abstract base class Stack &. This is to demonstrate the power of using virtual classes and class abstractions. If you specify the base class, you can pass an AStack or an LStack or any class that is derived from the base Stack class, as long as that class implements all of the virtual functions of the abstract Stack interface. Once you have your function working for Stack &, templatize your function. We practiced creating function templates in a previous assignment. Here it should be relatively simple, you simply need to add the template  before the function, and change the  to  to templatize. Once you do this, you function should still work and pass the tests using an  type. Once you have your insertItemOnSortedStack() template function working, it is even easier to use this function to create a sortStack() function. We could implement this function again using a temporary stack, but for this fourth and nal function I want you instead to create a recursive function. A recursive function in this case is going to work in essentially the same way, but we will be using the OS/system function call stack implicitly to perform the algorithm, rather than explicitly creating and using our own temporary stack. Create a function called sortStack(). This function should take a Stack & (a reference to a Stack of  types) as its only parameters. You will later templatize this function as well, but all of the tests of sortStack() use stacks of strings, so get it working rst for strings, then try and templatize the function. This is a void funciton, it doesn’t return a result, but it implicitly causes the stack it is given to become sorted. The function, as the name implies, will take an unsorted stack, and will sort them in the same order we used previously, e.g. in ascending order with the smallest item at the bottom of the stack, and the largest at the top. The pseudo-code to accomplish this using a recursize algorithm is as follows: 5 given inputStack as an input parameter # the base case if inputStack is empty, do nothing (return) # the general case take top item from inputStack and save it in a local variable call sortStack(inputStack) recursively on this now smaller stack # on return, the stack should be sorted, so insertItemOnSortedStack(my item I popped, inputStack) Once you have it working for  type stacks, also templatize your sortStack() function, so that it will actually work to sort a Stack of any type. In this assignment you will only be given 2 les, an assg-10-tests.cpp le with a main function and unit tests of the functions you are to write. You will also use the Stack.hpp header le that was developed and shown in the videos for class this week. You should not have to add or change any code in Stack.hpp. You just need to use the Stack class to implement your code/functions for this assignment. As usual, the tests have been commented out. I strongly suggest you implement the functions one at a time, in the order described above, and uncomment each test 1 at a time to test your work incrementally. 

Essay Help
Calculate your paper price
Pages (550 words)
Approximate price: -

Why Work with Us

Top Quality and Well-Researched Papers

We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.

Professional and Experienced Academic Writers

We have a team of professional writers with experience in academic and business writing. Many are native speakers and able to perform any task for which you need help.

Free Unlimited Revisions

If you think we missed something, send your order for a free revision. You have 10 days to submit the order for review after you have received the final document. You can do this yourself after logging into your personal account or by contacting our support.

Prompt Delivery and 100% Money-Back-Guarantee

All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.

Original & Confidential

We use several writing tools checks to ensure that all documents you receive are free from plagiarism. Our editors carefully review all quotations in the text. We also promise maximum confidentiality in all of our services.

24/7 Customer Support

Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.

Try it now!

Calculate the price of your order

Total price:
$0.00

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.

Essays

Essay Writing Service

No matter what kind of academic paper you need and how urgent you need it, you are welcome to choose your academic level and the type of your paper at an affordable price. We take care of all your paper needs and give a 24/7 customer care support system.

Admissions

Admission Essays & Business Writing Help

An admission essay is an essay or other written statement by a candidate, often a potential student enrolling in a college, university, or graduate school. You can be rest assurred that through our service we will write the best admission essay for you.

Reviews

Editing Support

Our academic writers and editors make the necessary changes to your paper so that it is polished. We also format your document by correctly quoting the sources and creating reference lists in the formats APA, Harvard, MLA, Chicago / Turabian.

Reviews

Revision Support

If you think your paper could be improved, you can request a review. In this case, your paper will be checked by the writer or assigned to an editor. You can use this option as many times as you see fit. This is free because we want you to be completely satisfied with the service offered.